Introduction-A shaper machine

September 5, 2008


A shaper is a machine tool used for shaping or surfacing metal and other materials.









 shaper operates by moving a hardened cutting tool backwards and forwards across the workpiece. On the return stroke of the ram the tool is lifted clear of the workpiece, reducing the cutting action to one direction only.

The workpiece mounts on a rigid, box shaped table in front of the machine. The height of the table can be adjusted to suit this workpiece, and the table can traverse sideways underneath the reciprocating tool which is mounted on the ram, the table motion is usually under the control of an automatic feed mechanism which acts on the feedscrew. The ram slides back and forth above the work, at the front end of the ram is a vertical tool-slide that may be adjusted to either side of the vertical plane. This tool-slide holds the clapper box and toolpost from where the tool can be positioned to cut the straight, flat surface on the top of the workpiece. The tool-slide permits feeding the tool downwards to put on a cut it or may be set away from the vertical plane, as required.

The ram is adjustable for stroke and, due to the geometry of the linkage, it moves faster on the return (non-cutting) stroke than on the forward, cutting stroke. This action is via a slotted link or whitworth link.

Cutting fluid may be employed to improve the finish and prolong the tool’s life.


6 Responses to “Introduction-A shaper machine”

  1. Darshan makwana Says:

    Hi bhaumik& his friends
    I M Drahsn makwana from f.y.m.e-1
    i like mechanical blog

  2. vijay Says:

    what is cuttting tool in a shaper m/c?

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: